TM 5-3805-291-10
TROUBLESHOOTING PROCEDURES - CONTINUED
0010 00
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
BRAKES - SERVICE AND PARKING/EMERGENCY - CONTINUED
WARN I N G
Park machine on level ground, stop engine, and lower work tool to
ground to prevent injury to operator and/or severe damage to
machine.
If emergency use of parking brake is required due to service brake
failure, ensure that brakes are inspected and repaired, if necessary,
before resuming machine operation. Injury or death to personnel
or damage to equipment could result from improperly or non-func-
tioning brakes.
1.
Bring machine to a safe stop and
Clean mud or dirt from under
5.
Service Brakes Do Not Operate
brake pedals. If problem still
check for mud or dirt under brake
Correctly.
exists, go to test step 2.
pedals.
2.
Bring machine to a safe stop and
Notify Unit Maintenance.
shut down engine immediately
WARN I N G
6.
Service Brakes Do Not Release
Correctly.
Park machine on level ground, stop engine, and lower work tool to
ground to prevent injury to operator and/or severe damage to
machine.
1.
Bring machine to a safe stop and
Clean mud or dirt from under
check for mud or dirt under brake
brake pedals. If problem still
pedals, causing pedals to stick.
exists, go to test step 2.
2.
Ensure parking brake is
Disengage parking brake. If
disengaged (WP 0004 00).
problem still exists, go to test step
3.
3.
Bring machine to a safe stop and
Notify Unit Maintenance.
shut down engine immediately
CHARGING SYSTEM
Electrical System Alert Indicator Comes 1.
Check that circuit breakers are not Reset circuit breakers. If problem
tripped (WP 0016 00).
still exists, go to test step 2.
On.
2.
Check for loose or broken
If loose or broken belt is found, or
serpentine belt.
if belt is OK and problem still
exists, notify Unit Maintenance.
0010 00-2
