TM 5-3805-291-10
TROUBLESHOOTING PROCEDURES - CONTINUED
0010 00
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ELECTRICAL SYSTEM - CONTINUED
N OTE
10. Taillights Do Not Come On - Continued.
A 30-minute cool down time may be required before circuit breaker
automatically resets.
3.
Check for blown taillight fuse (WP If fuse is blown, request
replacement fuse from Unit
Maintenance. If fuse is good,
notify Unit Maintenance.
1.
Check windshield washer fluid
If reservoir is empty, fill reservoir
11. Windshield Washer Not Working.
reservoir.
(WP 0012 00). If problem still
exists, go to test step 2.
2.
Check for blown fuse at fuse panel If fuse is blown, request
replacement fuse from Unit
Maintenance. If fuse is good and
problem still exists, go to test step
3.
3.
Check for loose or disconnected
Reconnect electrical connectors, if
electrical connectors (WP 0012
required. If problem still exists,
notify Unit Maintenance.
Check for blown fuse at fuse panel (WP If fuse is blown, request
12. Windshield Wiper Not Working.
replacement fuse from Unit
Maintenance. If fuse is good,
notify Unit Maintenance.
WORK AREA VISUAL SYSTEM (WAVS)
Check if light switch selector lever is in 1.
If not, select either STOP
1. Display or Camera Inoperative
either STOP LIGHT or SER DRIVE
LIGHT or SER DRIVE mode.
mode.
2.
If light switch is in either
STOP LIGHT or SER DRIVE
mode and problem still exists,
notify Unit Maintenance.
Check if brightness level is set 1.
If not, set brightness level
2.
Display is Blank
correctly (WP 0004 00, WAVS
correctly.
section, Table 1).
2.
If brightness level is set
correctly and problem still
exists, notify Unit
Maintenance.
Check if image orientation is set 1.
If not, set image orientation
3.
Display has Wrong Image Orientation
correctly (should appear as if looking
correctly.
in a rear view mirror) (WP 0004 00, 2.
If image orientation is set
correctly and problem still
WAVS section, Accessing All System
exists, notify Unit
Options Mirror Image).
maintenance.
0010 00-6