TM 5-3805-291-10
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)
INCLUDING LUBRICATION INSTRUCTIONS - CONTINUED
Table 1. Preventive Maintenance Checks and Services (PMCS) for the 966H Wheel Loader.
LOCATION
ITEM TO
ITEM
MAN-
CHECK/
NOT FULLY MISSION
NO.
INTERVAL
HOURS
SERVICE
PROCEDURE
CAPABLE IF:
N OT E
Review all WARNINGs, CAUTIONs, and NOTEs
before performing PMCS on the 966H Wheel Loader.
Perform all weekly and before operation PMCS checks
if:
a.
You are the assigned operator but have not operated the
loader since the last weekly checks.
b.
You are operating the loader for the first time.
Unless otherwise indicated, perform all preventive
maintenance and lubrication with machine parked on
level ground, work tool lowered to ground, parking
brake lever engaged, transmission in N (NEUTRAL),
and engine shut down.
FRONT AND
LEFT SIDE
a. Check on ground under machine Class III oil or coolant leaks
1
Before
Overall View
for evidence of fluid leakage such are evident. Any fuel leak-
0012 00
as oil, coolant, or fuel.
age is evident.
b. Check machine for obvious dam- Damage that would impair
age that would impair operation.
operation is evident.
Check for cracked, bent, or otherwise Cracks or damage that
2
Before
Forklift Pallet
would impair operation is
Forks (If
damaged forks and fork frame.
evident.
Equipped)
a. Check bucket for bends, cracks, or Cracks or damage that
3
Before
Bucket and
would impair operation is
Bucket Tips (If
other damage.
evident.
Equipped)
b. Check for missing tip. Replace if
necessary.
Check sweeper for damage.
Damage that would impair
4
Before
Sweeper (If
operation is evident.
Equipped)
a. Check quick coupler for cracks Cracks are evident. Wear
5
Before
Quick Cou-
and wear in pin area.
that would impair security
pler, Tilt Cyl-
of coupling is evident.
inder, and Lift
Arms
b. Ensure protective caps are
installed on two quick disconnect
fittings.
c. Check for leaking hydraulic lines Class III leaks are evident.
on work tool, quick coupler, lift
arms, and tilt cylinder.