TM 5-3805-291-10
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)
INCLUDING LUBRICATION INSTRUCTIONS - CONTINUED
0012 00
Table 1. Preventive Maintenance Checks and Services (PMCS) for the 966H Wheel Loader - Continued.
LOCATION
ITEM TO
CHECK/
ITEM
MAN-
NOT FULLY MISSION
NO.
INTERVAL
HOURS
PROCEDURE
CAPABLE IF:
SERVICE
f. Ensure battery is clean and battery Battery
cables
are
not
46
After
Batteries,
cables are secure.
secure.
(Cont)
Left-Side Bat-
tery Box, and
g. Close access cover and secure.
NATO Slave
h. Ensure that cover is installed on
Receptacle
NATO slave receptacle.
a. Check for damage and leaks on
47
After
Windshield
windshield washer fluid reservoir.
Washer Fluid
b. Check level of windshield washer
Reservoir
fluid. If level is low, remove cap
and add windshield-cleaning com-
pound until level is up to top of
filler neck. Reinstall cap.
427-C1680
a. Check for loose or missing bolts, Two or more bolts are miss-
48
After
Left-Rear
ing. Loose components are
Wheel and
cracks, and loose components.
evident.
Tire
b. Check tread and sidewall for cuts Damage to tire that would
and foreign material in treads. lead to tire failure is evident.
Remove foreign material from
treads.
c. Visually check tire inflation.
Tire is flat.
d. Look behind tire to ensure axle Axle seal is leaking.
seal is not leaking. A leaking axle
seal will leave streaks of oil on
inside of wheel.
0012 00-25
