TM 5-3805-291-10
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)
INCLUDING LUBRICATION INSTRUCTIONS - CONTINUED
0012 00
Table 1. Preventive Maintenance Checks and Services (PMCS) for the 966H Wheel Loader - Continued.
LOCATION
ITEM TO
CHECK/
ITEM
MAN-
NOT FULLY MISSION
SERVICE
NO.
INTERVAL
HOURS
PROCEDURE
CAPABLE IF:
f. Reinstall dipstick and turn clock-
53
After
0.2 Hour
Engine Oil
wise (to the right) until tight.
(Cont)
Level
g. Tilt hood to open position (WP Hood does not open.
a. Check for loose or missing bolts, Two or more bolts are miss-
54
After
Right-Rear
cracks, and loose rim components. ing. Loose components are
Wheel and
evident.
Tire
b. Check tread and sidewall for cuts Damage to tire that would
and foreign material in treads. lead to tire failure is evident.
Remove foreign material from
treads.
c. Visually check tire inflation.
Tire is flat.
d. Look behind tire to ensure axle Axle seal is leaking.
seal is not leaking. A leaking axle
seal will leave streaks of oil on
inside of wheel.
e. Check backside of wheel for oil Class III oil leaks are evi-
leaks from final drive.
dent.
a. Inspect right side of cab for dam- Damage is noted that would
55
After
Right-Side
age and broken glass.
impair operation.
Cab, Ladder,
and Operator
b. Check that front and rear right-side
Platform
worklights are present and not
damaged.
c. Check for damage to windows and
grabhandles.
d. Check that ladder is securely
mounted and in good condition.
e. Check that operator platform is
securely mounted and in good con-
dition.
f. Inspect for missing, damaged, or Remote grease fittings are
leaking remote grease fittings.
missing or damaged. Leaks
that would prevent proper
lubrication are evident.
a. Inspect hydraulic hoses for dam- If cracks, splits, bulges, or
56
After
Frame Articu-
age or leaks.
soft spots are evident in
lation Area
hoses, or Class III leaks are
evident.
0012 00-29
