TM 5-3805-291-23-1
BRAKE SYSTEM TESTS, INSPECTIONS, AND ADJUSTMENTS - CONTINUED
0015 00
SERVICE BRAKE WEAR INDICATOR (EXISTING BRAKE DISC) CHECK - CONTINUED
1.
Start and run engine until brake accumulators reach cut-out pressure (less than 30 seconds) (TM 5-3805-291-10).
2.
Stop engine and engage parking brake (TM 5-3805-291-10).
3.
Clean area around plug (12).
4.
Remove excess paint from axle housing flange face (13).
5.
Remove screw (14) and plug (12).
6.
Apply light pressure to pin (15) to ensure pin is seated against cup (16).
427-C0870
427-C2018
0015 00-18