TM 5-3805-291-23-1
VALVE COVER AND BASE REPLACEMENT - CONTINUED
0024 00
REMOVAL
1.
Remove 10 bolts (1) and washers (2) from valve cover (3).
2.
Remove valve cover (3) and gasket (4) from machine. Discard gasket.
3.
Remove 10 isolators (5) from valve covers (3).
427-C0106
4.
Remove five bolts (6), washers (7), clips (8), and four spacers (9) from valve cover base (10). Position wiring harness
(11) aside.
5.
Remove two bolts (12) and washers (13) and disconnect wiring harness (14) from wiring harness (11) and set both aside.
427-C1904
0024 00-2