TM 5-3805-291-23-2
ENGINE OIL FILTER BASE REPLACEMENT - CONTINUED
0028 00
INSTALLATION
N OT E
Apply a thin coat of clean oil to all O-rings before installation.
1.
Install new O-ring (20) and tube (19).
2.
Install two new O-rings (18), fitting (17), and valve (16).
3.
Install three new O-rings (15).
4.
Install new O-ring (14) and fitting (13).
5.
Install new gasket (12).
6.
Install oil filter base (11), six washers (10), and bolts (9).
7.
Install two washers (8) and bolts (7).
8.
Install two washers (6) and bolts (5).
9.
Install two washers (4) and bolts (3).
10.
Install new O-ring (2) and connect hose (1).
11.
Install oil filter (WP 0025 00).
12.
Run engine until normal operating temperature is reached (TM 5-3805-291-10).
Shut down engine (TM 5-3805-291-10).
13.
14.
Check for engine oil leaks.
427-C1025
END OF WORK PACKAGE
0028 00-6
