TM 5-3805-291-23-2
ENGINE OIL FILTER BASE REPLACEMENT - CONTINUED
0028 00
REMOVAL
C AU T I O N
Wipe area clean around all connections to be opened during removal. Cap lines and hoses and plug open-
ings after removing lines. Contamination of system could result in premature failure.
N OT E
Tag hoses prior to removal toensure correct installation.
Use a container to catch any fluid that may drain fr m hoses or system. Dispose of fluid IAW local policy
o
and ordinances. Ensure all spills are cleaned up.
1.
Disconnect hose (1) and O-ring (2). Discard O-ring.
2.
Remove two bolts (3) and washers (4).
3.
Remove two bolts (5) and washers (6).
4.
Remove two bolts (7) and washers (8).
5.
Remove six bolts (9), washers (10), and oil filter base (11).
6.
Remove and discard gasket (12).
7.
Remove fitting (13) and O-ring (14). Discard O-ring.
8.
Remove and discard three O-rings (15).
9.
Remove sampling valve (16), fitting (17), and two O-rings (18). Discard O-rings.
10.
Remove tube (19) and O-ring (20). Discard O-ring.
427-C1025
0028 00-2