TM 5-3805-291-23-1
SERPENTINE BELT REPLACEMENT - CONTINUED
0048 00
INSTALLATION
N OT E
Ensure new belt is routed correctly, as shown.
The correct tension will automatically be applied.
1.
Install belt (7) and route belt around all pulleys except one.
2.
Rotate tensioner (6) counterclockwise and slip belt over remaining pulley.
3.
Release tensioner (6) slowly when belt (7) is fully installed.
4.
Install cover (4), two washers (3), and bolts (2) and tighten two bolts (1) on engine shield (5).
5.
Run engine to verify correct operation of accessories (TM 5-3805-291-10).
6.
Close hood (TM 5-3805-291-10).
END OF WORK PACKAGE
0048 00-3/(0048 00-4 Blank)