TM 5-3805-291-23-2
BLACKOUT DRIVE LIGHT REPLACEMENT - CONTINUED
0068 00
REMOVAL
1.
Remove four bolts (7), washers (8), and plate (6) from headlamp housing (9).
2.
Disconnect blackout drive light (1) from wiring harness (5).
3.
Remove bolt (3), two washers (4), nut (10), and ground lead (2) from blackout drive light (1).
4.
Remove blackout drive light (1) from headlamp housing (9).
INSTALLATION
1.
Position blackout drive light (1) on headlamp housing (9).
2.
Install ground lead (2), nut (10), two washers (4), and bolt (3) on blackout drive light (1).
3.
Connect blackout drive light (1) to wiring harness (5).
4.
Install plate (6) on headlamp housing (9) with four washers (8) and bolts (7).
5.
Verify correct operation of blackout drive light (TM 5-3805-291-10).
END OF WORK PACKAGE
0068 00-2
