TM 5-3805-291-23-2
ATMOSPHERIC PRESSURE SENSOR REPLACEMENT - CONTINUED
0073 00
REMOVAL
1.
Disconnect atmospheric pressure sensor wiring harness connector (1) from wiring harness (2).
2.
Remove atmospheric pressure sensor (3) and O-ring (4) from turbo charger air inlet (5). Discard O-ring.
483-1409
INSTALLATION
1.
Lubricate new O-ring (4) with a thin coat of clean oil. Install O-ring and atmospheric pressure sensor (3) on turbo-
charger air inlet (5).
2.
Connect atmospheric pressure sensor wiring harness connector (1) to wiring harness (2).
3.
Run engine and check for correct engine operation (TM 5-3805-291-10).
4.
Shut down engine (TM 5-3805-291-10).
5.
Close hood (TM 5-3805-291-10).
END OF WORK PACKAGE
0073 00-2