TM 5-3805-291-23-2
BOOST PRESSURE SENSOR REPLACEMENT - CONTINUED
0074 00
REMOVAL
1.
Remove and discard five tiedown straps (1) from wiring harness (2).
2.
Disconnect sensor lead (2) from wiring harness (3).
3.
Remove boost pressure sensor (4) from machine.
4.
Remove O-ring (5) from boost pressure sensor (4). Discard O-ring.
427-C0094
INSTALLATION
1.
Lubricate new O-ring (5) with a thin coat of clean oil. Install new O-ring on boost pressure sensor (4).
2.
Install boost pressure sensor (4) on machine.
3.
Connect wiring harness (3) to sensor lead (2).
4.
Install five new tiedown straps (1) on wiring harness (3).
5.
Run engine and check for correct engine operation (TM 5-3805-291-10).
6.
Shut down engine (TM 5-3805-291-10).
7.
Close hood (TM 5-3805-291-10).
END OF WORK PACKAGE
0074 00-2