TM 5-3805-291-23-2
PARKING BRAKE OIL PRESSURE SWITCH REPLACEMENT - CONTINUED
0086 00
INSTALLATION
1.
Lubricate new O-ring (4) with a thin coat of clean oil. Install new O-ring and parking brake oil pressure switch (2) on
machine. Tighten parking brake oil pressure switch to 35 4 lb-ft (48 5 Nm).
2.
Connect wiring harness (3) to parking brake oil pressure switch (2).
3.
Install new tiedown strap (1) on parking brake oil pressure switch (2).
4.
Check brake fluid level (TM 5-3805-291-10).
5.
Run engine until normal operating temperature is reached (TM 5-3805-291-10).
6.
Shut down engine (TM 5-3805-291-10).
7.
Check for leaks.
8.
Operate parking brake several times to verify correct parking brake pedal operation (TM 5-3805-291-10).
END OF WORK PACKAGE
0086 00-3/(0086 00-4 Blank)