TM 5-3805-291-23-2
STEERING OIL PRESSURE SWITCHES REPLACEMENT - CONTINUED
0088 00
REMOVAL
1.
Remove and discard tiedown strap (1) from connector
(2).
2.
Disconnect connectors (2 and 3) from wiring harness
(4).
3.
Remove two steering oil pressure switches (5) and O-
rings (6) from machine. Discard O-rings.
INSTALLATION
1.
Lubricate two new O-rings (6) with a thin coat of clean oil, then install O-rings and steering oil pressure switches (5) on
machine. Tighten steering oil pressure switches to 55 5 lb-ft (75 7 Nm).
2.
Connect connectors (2 and 3) to wiring harness (4).
3.
Install new tiedown strap (1) on connector (2).
4.
Check steering fluid level (TM 5-3805-291-10).
5.
Run engine until normal operating temperature is reached (TM 5-3805-291-10).
6.
Shut down engine (TM 5-3805-291-10).
7.
Check for steering fluid leaks.
END OF WORK PACKAGE
0088 00-2