TM 5-3805-291-23-2
SERVICE BRAKE OIL PRESSURE SWITCH REPLACEMENT - CONTINUED
0087 00
REMOVAL
1.
Remove bolt (1) and washer (2) from clamp (3).
2.
Remove clamp (3) from wiring harness (4).
427-C1555
3.
Disconnect wiring harness (5) from engine wiring
harness (4).
4.
Remove service brake oil pressure switch (6) from
T (7). Remove and discard O-ring (8).
427-C1556
INSTALLATION
1.
Lubricate new O-ring (8) with clean oil. Install new O-ring in service brake oil pressure switch (6).
2.
Install service brake oil pressure switch (6) on T (7). Tighten switch to 35 4 lb-ft (48 5 Nm).
3.
Connect wiring harness (5) to engine wiring harness (4).
4.
Install clamp (3) on wiring harness (4).
5.
Install washer (2) and bolt (1) on clamp (3).
6.
Install right side cover (WP 0135 00).
7.
Check oil level (TM 5-3805-291-10).
8.
Run engine until normal operating temperature is reached (TM 5-3805-291-10).
9.
Shut down engine (TM 5-3805-291-10).
10.
Check for oil leaks.
END OF WORK PACKAGE
0087 00-2