TM 5-3805-291-23-2
TRANSMISSION OIL COOLER LINES REPLACEMENT - CONTINUED
0102 00
REMOVAL
C AU T I O N
Wipe area clean around all connections to be opened during removal. Cap lines and hoses and plug open-
ings after removing lines. Contamination of system could result in premature failure.
N OT E
Tag hoses prior to removal to ensure correct installation.
Use a container to catch any fluid that may drain from hoses or system. Dispose of fluid IAW local pol-
icy and ordinances. Ensure all spills are cleaned up.
1.
Remove bolt (1), washer (2), and nut (3) from clamps (4 and 5).
2.
Remove clamps (4 and 5) from tubes (6 and 7).
3.
Remove bolt (8) and washer (9) from clamp (10).
4.
Remove clamp (10) from tube (6).
5.
Remove bolt (11) and washer (12) from clamp (13).
6.
Remove clamp (13) from tube (7).
7.
Remove four bolts (14), washers (15), flange (16), two O-rings (17), seal (18), and tube (6) from flange (19). Discard O-
rings and seal.
8.
Disconnect test probe (20) from tube (7).
427-C0338
0102 00-2
