TM 5-3805-291-23-2
PARKING BRAKE CONTROL VALVE REPLACEMENT - CONTINUED
0115 00
REMOVAL
C AU T I O N
Wipe area clean around all connections to be opened during removal. Cap lines and hoses and plug
openings after removing lines. Contamination of system could result in premature failure.
N OT E
Tag hoses prior to removal to ensure correct installation.
Use a container to catch any fluid that may drain from hoses or system. Dispose of fluid IAW local policy
and ordinances. Ensure all spills are cleaned up.
1.
Disconnect three hose assemblies (1) and O-rings (2) from parking brake control valve (3). Discard O-rings.
2.
Disconnect wiring harness connectors (4) from parking brake control valve (3).
3.
Remove two bolts (5), washers (6), and nuts (7) from parking brake control valve (3).
427-C0115
0115 00-2
