TM 5-3805-291-23-2
STEERING CYLINDERS REPLACEMENT - CONTINUED
0125 00
C AU T I O N
Wipe area clean around all connections to be opened during removal. Cap lines and hoses and plug open-
ings after removing lines. Contamination of system could result in premature failure.
N OT E
Tag hoses prior to removal to ensure correct installation.
Use a container to catch any fluid that may drain from hoses or system. Dispose of fluid IAW local pol-
icy and ordinances. Ensure all spills are cleaned up.
REMOVAL
1.
Disconnect two hose assemblies (1) and remove
O-rings (2) from steering cylinder (3). Discard
O-rings.
2.
Remove two fittings (4) and O-rings (5) from steering
cylinder (3). Discard O-rings.
3.
Remove lubrication line (6) from steering cylinder (3).
427-C0530
0125 00-2