TM 5-3805-291-23-2
STEERING HOSES, LINES, AND FITTINGS REPLACEMENT - CONTINUED
0124 00
REMOVAL - CONTINUED
427-C1853
INSTALLATION
N OT E
Apply a thin coat of clean oil to all O-rings before installation.
1.
Install sleeve (65) and two clamps (64) on pipe (63).
2.
Position pipe (63) on machine and connect pipe to steering control valve (WP 0127 00).
3.
Connect pipe (63) to hydraulic tank (WP 0159 00).
4.
Position hose (62) on machine and connect hose to steering control valve (WP 0127 00).
5.
Connect hose (62) to hydraulic tank (WP 0159 00).
6.
Connect hoses (60 and 61) to steering cylinder (WP 0125 00).
7.
Connect hoses (60 and 61) to steering control valve (WP 0127 00).
8.
Repeat steps 6 and 7 for other steering cylinder hoses.
9.
Install new O-rings (58 and 59) in fittings (54 and 56) and install fittings on machine.
10.
Install new O-ring (57) in line (53) and connect line to fitting (56).
11.
Install new O-ring (55) in line (53) and connect line to fitting (54).
0124 00-7
