TM 5-3805-291-23-2
ENGINE REPLACEMENT - CONTINUED
0171 00
COMPONENT TRANSFER
N OT E
It is highly recommended that component transfer be done with both engines side-by-side and that old
engine not be released until machine is operational.
1.
Remove bolt (108), washer (109), and clamp (110) from engine (15).
2.
Remove two bolts (111), washers (112), and bracket (113) from engine (15).
3.
Remove three nuts (114), washers (115), and brackets (116) from engine (15).
4.
Remove bolt (117), washer (118), and bracket (119) from engine (15).
5.
Remove three bolts (120), washers (121), and pump (44) with hoses still attached to engine (15).
N OT E
Tag all wiring harnesses and note location of tiedown straps and mounting hardware prior to disconnecting
to ensure correct installation.
6.
Disconnect connector (122), cut and discard all tiedown straps (123), and disconnect remaining connections.
7.
Remove four bolts (124), washers (125), and two brackets (126) from engine (15).
8.
Remove bolt (127), washer (128), and bracket (129) from engine (15).
427-C1910
