TM 5-3805-291-23-2
INTAKE MANIFOLD REPLACEMENT - CONTINUED
0185 00
INSTALLATION - CONTINUED
8.
Connect two wiring harnesses (10) to sensors (11).
9.
Place bracket (8) in position on stud (9).
10.
Install washer (7) and nut (6) on stud (9).
11.
Install bracket (3), two clamps (5), and hoses (4) on
machine.
12.
Install washer (2) and bolt (1) on stud (4).
427-C1030
13.
Install air intake assembly hoses (WP 0034 00).
14.
Install ether atomizer, if removed (WP 0037 00).
15.
Run engine until normal operating temperature is reached (TM 5-3805-291-10).
16.
Shut down engine (TM 5-3805-291-10).
17.
Check for leaks.
END OF WORK PACKAGE
0185 00-5/(0185 00-6 Blank)
