TM 5-3805-291-23-2
EXHAUST MANIFOLD REPLACEMENT - CONTINUED
0184 00
REMOVAL
1.
Remove 12 nuts (1), washers (2), and spacers (3) from studs (4).
2.
Remove manifold (5) and six gaskets (6) from studs (4). Discard gaskets.
3.
If necessary, remove 12 studs (4) from manifold (5).
427-C1029
INSTALLATION
1.
If removed, apply antiseize compound to stud threads and install 12 studs (4) on machine.
2.
Tighten studs (4) to 26 4 lb-ft (35 5 Nm).
3.
Position six new gaskets (6) and manifold (5) on studs (4).
4.
Apply antiseize compound to 12 nuts (1).
N OT E
The exhaust manifold gaskets have tabs. Tabs should point to oil pan.
5.
Install 12 spacers (3), washers (2), and nuts (1) on studs (4).
6.
Tighten nuts (1) to 41 7 lb-ft (55 10 Nm).
7.
Install turbocharger (WP 0031 00).
8.
Run engine until normal operating temperature is reached (TM 5-3805-291-10).
9.
Shut down engine (TM 5-3805-291-10).
10.
Check for leaks.
END OF WORK PACKAGE
0184 00-2