TM 5-3805-291-23-2
FRONT CHASSIS WIRING HARNESS REPLACEMENT - CONTINUED
0197 00
INSTALLATION
1.
Position front wiring harness (1) on machine.
2.
Install washer (46) and nut (45) on machine.
3.
Install two washers (44) and nuts (43) on machine.
4.
Install washer (42) and nut (41) on machine.
5.
Install washer (40) and nut (39) on machine.
6.
Install six washers (38), clips (37), washers (36), and nuts (35) on machine.
7.
Install three washers (34), clips (33), washers (32), and nuts (31) on machine.
8.
Install washer (30), clip (29), two washers (28), and nut (27) on machine.
9.
Install clip (26), washer (25), and bolt (24) on machine.
10.
Install clip (23), washer (22), and bolt (21) on machine.
11.
Install clamp (20), plate (19), two washers (18), and bolts (17) on front wiring harness (1).
12.
Install clamp (16), plate (15), two washers (14), and bolts (13) on front wiring harness (1).
13.
Connect wiring harness (1) to pilot solenoid (12).
14.
Connect wiring harness (1) to tilt and lift solenoid (11).
15.
Connect wiring harness (1) to tilt cylinder anti-drift sensor (10).
16.
Connect wiring harness (1) to front axle temperature sensor (9).
17.
Connect wiring harness (1) to quick coupler harness connector (8).
18.
Connect wiring harness (1) to lift position sensor (7).
19.
Connect wiring harness (1) to two horns (6).
20.
Connect wiring harness (1) to tilt harness connector (5).
21.
Connect wiring harness (1) to lighting harness connector (4).
22.
Install 24 new tiedown straps (3) on front wiring harness (1).
23.
Connect front wiring harness (1) to chassis wiring harness (2).
0197 00-4