TM 5-3805-291-23-2
HEATER AND AIR CONDITIONING WIRING HARNESS REPLACEMENT - CONTINUED
0198 00
REMOVAL - CONTINUED
4.
Remove bolt (5) and washer (6) from heater/AC
assembly (7).
5.
Remove clip (8) from heater/AC wiring harness (1).
6.
Disconnect heater/AC wiring harness (1) from sensor
(9).
7.
Disconnect heater/AC wiring harness (1) from temper-
ature switch (10).
8.
Remove grommet (11) from heater/AC assembly (7).
9.
Disconnect three wires from heater/AC assembly (7).
10.
Remove heater/AC wiring harness (1) from heater/AC
assembly (7).
427-C1199
INSTALLATION
1.
Position heater/AC wiring harness (1) on heater/AC assembly (7).
2.
Connect three wires to heater/AC assembly (7).
3.
Install grommet (11) on heater/AC assembly (7).
4.
Connect heater/AC wiring harness (1) to temperature switch (10).
5.
Connect heater/AC wiring harness (1) to sensor (9).
6.
Install clip (8) on heater/AC wiring harness (1).
7.
Install washer (6) and bolt (5) on heater/AC assembly (7).
8.
Connect heater/AC wiring harness (1) to blower motor (4).
9.
Install new tiedown strap (3) on heater/AC wiring harness (1).
10.
Connect heater/AC wiring harness (1) to cab wiring harness (2).
11.
Install left rear interior panel (WP 0138 00).
12.
Connect battery cables to battery (WP 0096 00).
13.
Start machine (TM 5-3805-291-10).
14.
Run machine and verify correct operation of AC and heater systems (TM 5-3805-291-10).
15.
Shut down engine (TM 5-3805-291-10).
END OF WORK PACKAGE
0198 00-3/(0198 00-4 Blank)