TM 5-3805-291-23-2
SECONDARY STEERING WIRING HARNESS REPLACEMENT - CONTINUED
0200 00
REMOVAL
WARN I N G
Ensure battery cables are disconnected before performing this task. Failure to follow this warning may
result in injury to personnel or damage to equipment.
N OT E
Note location of all tiedown straps and fasteners to ensure correct installation.
Tag wires prior to removal to ensure correct installation.
Some nuts, bolts, and components in illustrations removed for clarity.
1.
Remove and discard three tiedown straps (1) from secondary steering wiring harness (2).
2.
Remove bolt (3), washer (4), and spacer (5) from clip (6).
3.
Remove clip (6) from secondary steering wiring harness (2).
4.
Remove five bolts (7) and washers (8) from clips (9).
5.
Remove five clips (12) from secondary steering wiring harness (2).
6.
Disconnect secondary steering wiring harness (2) from secondary steering pump (10).
7.
Disconnect secondary steering wiring harness (2) from arc suppressor (11).
8.
Disconnect secondary steering wiring harness (2) from switch (12).
9.
Disconnect secondary steering wiring harness (2) from switch (13).
10.
Disconnect secondary steering wiring harness (2) from wiring assembly (14).
11.
Remove secondary steering wiring harness (2) from machine.
0200 00-2