TM 5-3805-291-23-2
TRANSMISSION CONTROL WIRING HARNESS REPLACEMENT - CONTINUED
0201 00
REMOVAL - CONTINUED
8.
Remove three bolts (13) and plates (12) from machine.
9.
Remove bolt (14) from clip assembly (15).
10.
Remove clip assembly (15) from transmission control wiring harness (4).
11.
Disconnect transmission control wiring harness (4) from torque converter output speed sensor (16).
12.
Disconnect transmission control wiring harness (4) from six modulating valves (17).
13.
Disconnect transmission control wiring harness (4) from two transmission output speed sensors (18).
14.
Disconnect transmission control wiring harness (4) from oil temperature sensor (19).
15.
Remove transmission control wiring harness (4) from machine.
INSTALLATION
1.
Position transmission control wiring harness (4) on machine.
2.
Connect transmission control wiring harness (4) to oil temperature sensor (19).
3.
Connect transmission control wiring harness (4) to two transmission output speed sensors (18).
4.
Connect transmission control wiring harness (4) to six modulating valves (17).
5.
Connect transmission control wiring harness (4) to torque convertor output speed sensor (16).
6.
Install clip assembly (15) on transmission control wiring harness (4).
7.
Install bolt (14) on clip assembly (15).
8.
Install three plates (12) and bolts (13) on machine.
9.
Position transmission control wiring harness (4) on three plates (12) and install nine new tiedown straps (11) on plates.
10.
Install clip (10) on transmission control wiring harness (4).
11.
Install bolt (9) on clip (10).
12.
Install clip (8), washer (7), and bolt (6) on machine.
13.
Position transmission control wiring harness (4) on clip (3) and install new tiedown strap (5) on transmission control
wiring harness.
14.
Install clip (3) on transmission control wiring harness (4).
15.
Install washer (2) and bolt (1) on clip (3).
16.
Install cab (WP 0132 00).
17.
Start machine (TM 5-3805-291-10).
18.
Drive and verify correct operation of machine (TM 5-3805-291-10).
19.
Shut down engine (TM 5-3805-291-10).
END OF WORK PACKAGE
0201 00-3/(0201 00-4 Blank)
