8
TM 5-3805-291-23-2
FRONT AXLE REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Maintenance Level
Materials/Parts - Continued
Direct Support
Oil, lubricating, OEA-30, Arctic (Item 29, WP
Tools and Special Tools
Tool kit, general mechanic's, automotive (Item 90,
Oil, lubricating, TO-4 (Item 31, WP 0233 00)
Rag, wiping (Item 35, WP 0233 00)
Shop equipment, automotive maintenance and
Tag, marker (Item 43, WP 0233 00)
repair: field maintenance, basic, less power (Item
O-ring
68, WP 0232 00)
Pin, shoulder, headless (Item 48, WP 0232 00)
Personnel Required
Saddle assembly, lifting block (Item 65, WP 0232
MOS 62B, Construction Equipment Repairer (2)
00)
References
Stand assembly (Item 78, WP 0232 00)
TM 5-3805-291-10
Stand assembly (Item 79, WP 0232 00)
WP 0015 00
Tubing assembly set, nonmetallic (Item 93, WP
Wrench, torque, click, ratcheting, 1/2" drive, 250
Equipment Conditions
lb-ft (Item 99, WP 0232 00)
Front tires and rims removed (WP 0119 00)
Lifting equipment, 5,100-lb capacity
Axle temperature sensor removed (WP 0081 00)
Multiplier, torque
Drawings Required
Materials/Parts
TM 5-3805-291-23P, Figures 95 and 96
Cap set, protective (Item 6, WP 0233 00)
Estimated Time to Complete Task
Cleaning compound, solvent, type III (Item 7, WP
10.0 hr
WAR N I N G
DO NOT disconnect or remove any hydraulic systemline or fitting unless engine is shut down and
hydraulic system pressure has been relieved. Tighten all connections before applying pressure. Escaping
hydraulic fluid under pressure can penetrate the skin, causing injury to personnel.
At operating temperature, hydraulic oil is hot. Alow hydraulic oil to cool before disconnecting any
hydraulic lines. Failure to follow this warning may result in injury to personnel.
C AU T I O N
Wipe area clean around all connections to be opened during removal. Cap lines and hoses and plug
openings after removing lines. Contamination of system could result in premature failure.
