TM 5-3805-291-23-2
SEPARATE FRONT LOADER FRAME AND REAR FRAME - CONTINUED
0211 00
SEPARATION
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting equipment used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting equipment. Failure to follow this warning may result in injury
or death to personnel.
C AU T I O N
Wipe area clean around all connections to be opened during removal. Cap lines and hoses and plug open-
ings after removing lines. Contamination of system could result in premature failure.
N OT E
Tag hoses prior to removal to ensure correct installation.
Use a container to catch any fluid that may drain from hoses or system. Dispose of fluid IAW local pol-
icy and ordinances. Ensure all spills are cleaned up.
Machine without cab weighs 50,044 lb (22,700 kg).
1.
Remove bolt (1), washer (2), and pin assembly (3)
from frame (4).
2.
Position steering cylinder (5) aside. Repeat for
remaining steering cylinder.
427-C1004
0211 00-2