TM 5-3805-291-23-2
STEERING NEUTRALIZER VALVE REPLACEMENT - CONTINUED
0210 00
N OT E
Tag hoses prior to removal to ensure correct installation.
Use a container to catch any fluid that may drain from hoses or system. Dispose of fluid IAW local pol-
icy and ordinances. Ensure all spills are cleaned up.
The following procedure is for the right steering cylinder. The procedure for the left is identical.
REMOVAL
1.
Disconnect hose (1) and remove O-ring (2) from fitting (3). Discard O-ring.
2.
Remove fitting (3) and O-ring (4) from steering neutralizer valve (5). Discard O-ring.
3.
Disconnect tube (6) and remove O-ring (7) from fit-
ting (8). Discard O-ring.
4.
Remove fitting (8) and O-ring (9) from steering neu-
tralizer valve (5). Discard O-ring.
5.
Disconnect tube (10) and remove O-ring (11) from fit-
ting (12). Discard O-ring.
6.
Remove fitting (12) and O-ring (13) from steering
neutralizer valve (5). Discard O-ring.
7.
Remove two bolts (14) and washers (15) from steering
neutralizer valve (5).
427-C1171
8.
Remove steering neutralizer valve (5) from frame
(16).
INSTALLATION
1.
Position steering neutralizer valve (5) on frame (16).
2.
Install two washers (15) and bolts (14) on steering neutralizer valve (5).
N OT E
Apply a thin coat of clean oil to all O-rings before installation.
3.
Install new O-ring (13) and fitting (12) on steering neutralizer valve (5).
4.
Install new O-ring (11) and connect tube (10) to fitting (12).
5.
Install new O-ring (9) and fitting (8) on steering neutralizer valve (5).
6.
Install new O-ring (7) and connect tube (6) to fitting (8).
7.
Install new O-ring (4) and fitting (3) on steering neutralizer valve (5).
8.
Install new O-ring (2) and connect hose (1) to fitting (3).
0210 00-2