TM 5-3805-292-10
0006
OPERATION IN EXTREME COLD CONTINUED
Heating Cab
1. Remove three bolts (Figure 3, Item 1) and washers (Figure 3, Item 2) from floor plate (Figure 3, Item 3).
2. Remove floor plate (Figure 3, Item 3) from cab.
1
2
3
458-0070
Figure 3. Floor Plate.
0006
NOTE
Valve handle is parallel to hose in ON position.
3. Turn heater/coolant valve (Figure 4, Item 1) to ON position for water to flow through heater core.
1
458-0300
Figure 4. Heater/Coolant Valve (On).
0006
4. Position floor plate (Figure 3, Item 3) in cab.
5. Install three washers (Figure 3, Item 2) and bolts (Figure 3, Item 1).