TM 5-3805-292-10
0006
RAISING LOADER ARMS WITH ENGINE STOPPED AND NO ELECTRICAL POWER
0006
WARNING
When servicing this equipment, performing maintenance, or disposing of materials such
as engine/hydraulic oil, engine coolant, fuel, battery acids, batteries, windshield cleaning
compound, and CARC paint, consult your unit/local hazardous waste disposal center or
safety office for local regulatory guidance.
NOTE
Tag all hose connections to aid in installation.
1. Disconnect two fittings (Figure 2, Item 1) to allow movement of loader arms. Repeat other side.
Figure 2. Attachment Coupler and Loader Arm Hose Connections.
0006
2. Using lifting device, slowly raise loader arm and allow the hydraulic fluid to bleed out of cylinders into a suitable
container.
3. Install support strut (WP 0005).
END OF TASK