TM 5-3805-292-10
0008
REMOVAL CONTINUED
CAUTION
Do not let pin hang by retainer tether. Failure to follow this caution can result in damage to
components.
2. Connect four retainers and pins (Figure 2, Item 1).
Figure 2. Stowage of Cover Pins and Retainers When Not in Use.
0008
3. Start engine. Refer to Starting Engine in WP 0005.
4. Tilt attachment coupler (Figure 3, Item 1) with top forward and slowly drive machine forward until top of attach-
ment coupler fits under cover lifting bracket (Figure 3, Item 2). Refer to Operating Machine in WP 0005.
5. Raise loader arms to engage top of attachment coupler (Figure 3, Item 1) into cover lifting bracket (Figure 3,
Item 2). Refer to Operating Loader in WP 0005.
WARNING
Operator can not exit machine during this step due to partially raised loader arm blocking
door. Failure to follow this warning may result in injury or death to personnel.
6. Tilt attachment coupler (Figure 3, Item 1) back so that attachment coupler and lower latch bar (Figure 3, Item 4)
are in full contact. With assistance, engage manual locking levers (Figure 3, Item 5). Refer to Operating Loader
in WP 0005.
