TM 5-3805-292-23
0015
CLEANING AND INSPECTION CONTINUED
1. Clean all parts (except rubber and plastic surfaces) and mating surfaces with solvent cleaning compound.
WARN I N G
Particles blown by compressed air are hazardous. DO NOT exceed 15 psi (103 kPa)
nozzle pressure when drying parts with compressed air. DO NOT direct compressed air
against human skin. Make sure air stream is directed away from user and other personnel
in the area. To prevent injury, user must wear protective goggles or face shield. Failure to
follow this warning may result in injury to personnel.
2. Dry parts with compressed air.
3. Inspect parts for wear, pitting, cracks, or corrosion and replace if necessary.
END OF TASK
INSTALLATION
00015
Pulley Installation
00015
1. Install pulley (Figure 2, Item 1) onto engine (Figure 2, Item 2) and align holes.
2. Install serpentine belts (WP 0052).
END OF TASK
0015-5
