TM 5-3805-292-23
0026
REMOVAL CONTINUED
2. Place container of 3 gal. capacity under machine to catch oil.
WARN I N G
Contact with engine/hydraulic oil can damage skin. Wear gloves when handling engine/
hydraulic oil. If oil contacts skin, wash it off immediately. Failure to follow this warning may
result in injury to personnel.
3. Remove plug (Figure 2, Item 3) and O-ring (Figure 2, Item 2) from oil pan (Figure 2, Item 1). Discard O-ring.
WARN I N G
When servicing this machine, performing mainenance, or disposing of materials such as
t
engine coolant, hydraulic fluid, lubricants, battery acids or batteries, and CARC paint,
consult your unit/local hazardous waste disposal center or safety office for local regulatory
guidance. If further information is needed, please contact The Army Environmental Hotline
at 1-800-872-3845.
Lubricating/hydraulic oils used in the performance of maintenance can be very slippery.
Immediately wipe up any spills.
To prevent injury to personnel, wear protective eye covering and gloves.
Failure to follow these warnings ma result in injury to personnel.
y
4. Drain oil from machine.
Figure 2. Engine Oil Drain.
0026
