TM 5-3805-292-23
0067
INSTALLATION CONTINUED
1. Install three hydraulic fittings (Figure 4, Item 7) and lines (Figure 4, Item 6) on hydraulic drive motor (Figure 4,
Item 1).
2. Install clamp (Figure 4, Item 2) and hose (Figure 4, Item 8) on hydraulic drive motor (Figure 4, Item 1).
3. Install lifting device on hydraulic drive motor (Figure 4, Item 1).
WARN I N G
Use assistance when lifting heavy parts. Failure to follow this warning may result in injury
to personnel.
N OT E
Orient hydraulic drive motor as noted during removal.
Hydraulic drive motorweighs 130 lb (60 kg).
4. Apply sealing compound to bolts and mating surfaces before installing.
5. With assistance attach lifting device and install hydraulic drive motor (Figure 4, Item 1), six washers (Figure 4,
Item 3), bolts (Figure 4, Item 4), and nuts (Figure 4, Item 9) on machine.
6. Torque six bolts (Figure 4, Item 4) and nuts (Figure 4, Item 9) to 90 lb-ft (122 Nm).
7. Torque six bolts (Figure 4, Item 4) and nuts (Figure 4, Item 9) an additional 60 degrees.
8. Remove lifting device from hydraulic drive motor (Figure 4, Item 1).
9. Connect hydraulic line (Figure 4, Item 5) to hydraulic drive motor (Figure 4, Item 1).
Figure 4. Hydraulic Drive Motor.
0067
