TM 5-3805-292-23
0113
N OT E
There are two pivot struts, a main pivot strut and an auxiliary pivot strut.
REMOVAL
000113
WARN I N G
ROPS assembly is very heavy and should be supported using suitable lifting equipment
during this procedure. Use extreme caution when handling heavy parts. Provide adequate
support and use assistance during procedure. Ensure that any lifting equipment is in good
condition and of suitable load capacity. Keep clear of heavy parts supported by lifting
equipment. Failure to follow this warning may result in injury or death to personnel.
1. Ensure safety latch is engaged.
2. Remove nut (Figure 1, Item 1) and washer (Figure 1, Item 2) from RH side of ROPS assembly (Figure 1,
Item 3).
Figure 1. Exterior Nut.
0113