TM 5-3805-292-23
0130
ASSEMBLY CONTINUED
11. Connect two heater hoses (Figure 10, Item 28) and install clamps (Figure 10, Item 27) on deluxe heater A/C
assembly.
12. Install wiring harness (Figure 10, Item 6) on deluxe heater A/C assembly.
13. Position mounting plate (Figure 10, Item 16) on blower motor housing (Figure 10, Item 15).
14. Install eight screws (Figure 10, Item 14) on blower motor housing (Figure 10, Item 15).
N OT E
Install electrical connectors as noted during removal.
15. Connect wiring harness (Figure 10, Item 6) on blower motor housing (Figure 10, Item 15) and thermostat (Fig-
ure 10, Item 13).
16. Install blower motor housing (Figure 10, Item 15) and mounting plate (Figure 10, Item 16) on lower case (Fig-
ure 10, Item 26).
17. Install two new lockwashers (Figure 10, Item 17) and bolts (Figure 10, Item 18) on lower case (Figure 10, Item
26).
18. Install upper case (Figure 10, Item 5) on lower case (Figure 10, Item 26).
19. Install 10 screws (Figure 10, Item 2) two new lockwashers (Figure 10, Item 4), and bolts (Figure 10, Item 3) on
upper case (Figure 10, Item 5).
20. Install angle bracket (Figure 10, Item 9) and three screws (Figure 10, Item 10) on upper case (Figure 10, Item
5).
21. Install new gasket (Figure 10, Item 8) on deluxe heater A/C assembly.
22. Install new charcoal filter element (Figure 10, Item 1) on deluxe heater A/C assembly.
23. Install two doors (Figure 10, Item 19), bezels (Figure 10, Item 21), and eight screws (Figure 10, Item 20) on
lower case (Figure 10, Item 26).
24. Install two connector receptacles (Figure 10, Item 12) on end cap covers (Figure 10, Item 11).
25. Position resistors on assembly (Figure 10, Item 23) and install two nuts (Figure 10, Item 26), wiring harness
(Figure 10, Item 24) and suppressor (Figure 10, Item 25).
26. Install five suppressors (Figure 10, Item 7) on wiring harness (Figure 10, Item 6).
0130-12