TM 5-3805-298-23-1
0019
Table 1. E0265 User Defined Shutdown Event Code - Continued.
019
EID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
15. Using a digital multimeter
Continuity - Replace engine control
E0265 User Defined
(WP 0174), test for continuity
wiring harness (WP 0294).
Shutdown Event Code -
between connector EN-C20
Continued
Proceed to Test Step 2.
(WP 0012, Figure 48) terminal 2
No Continuity - Proceed to step 16.
and machine ground.
16. Using a digital multimeter
Continuity - Replace engine control
(WP 0174), test for continuity
wiring harness (WP 0294).
between connector EN-C20
Proceed to Test Step 2.
(WP 0012, Figure 48) terminal 1
No Continuity - Replace engine ECM
and terminal 2.
(WP 0265).
Proceed to Test Step 2.
Test Step 2. Verify Symptom Is
Resolved.
1. Ensure all harness connectors are
connected.
2. Using MSD (WP 0008), verify
Event Code E0236 Is Active - Repeat
event code E0236 is not active.
troubleshooting from the beginning.
Event Code E0236 Not Active -
Troubleshooting complete.
END OF WORK PACKAGE
0019-6