TM 5-3805-298-23-1
0019
Table 1. E0265 User Defined Shutdown Event Code - Continued.
019
EID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
5. Select Status icon (Figure 1,
E0265 User Defined
Item 1) and select No Start
Shutdown Event Code -
Parameters status group (Figure 1,
Continued
Item 4).
6. Monitor and record User Shutdown
User Shutdown Parameter Indicates
OFF - Replace engine ECM (WP 0265).
parameter (Figure 1, Item 3).
Proceed to Test Step 2.
User Shutdown Parameter Indicates
ON - Proceed to step 7.
7. Disconnect connector EW-C2
(WP 0012, Figure 50) from engine
shutdown switch connector
(WP 0012, Figure 51).
8. Monitor and record User Shutdown
User Shutdown Parameter Indicates
parameter (Figure 1, Item 3).
OFF - Replace engine shutdown switch
(WP 0296).
Proceed to Test Step 2.
User Shutdown Parameter Indicates
ON - Proceed to step 9.
9. Remove right engine access panel
(WP 0348).
10. Disconnect connector EW-C1
(WP 0012, Figure 49) from
connector EN-C20 (WP 0012,
Figure 48).
11. Monitor and record User Shutdown
User Shutdown Parameter Indicates
parameter (Figure 1, Item 3).
OFF - Replace engine shutdown jumper
harness (WP 0296).
Proceed to Test Step 2.
User Shutdown Parameter Indicates
ON - Select Disconnect icon (Figure 1,
Item 2).
Turn ignition switch and battery
disconnect switch to the OFF position
(TM 5-3805-298-10).
Proceed to step 12.
0019-4