TM 5-3805-298-23-1
0020
Table 1. E0329 Transmission Filter Plugged Event Code - Continued.
020
EID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 3. Test Transmission Oil
E0329 Transmission Filter
Filter Bypass Switch.
Plugged Event Code -
1. Turn ignition switch and battery
Continued
disconnect switch to OFF position
(TM 5-3805-298-10).
2. Remove nut (Figure 1, Item 2) and
transmission wiring harness
connector (Figure 1, Item 3) from
transmission oil filter bypass
switch (Figure 1, Item 1)
(WP 0012, Figure 102).
3. Turn battery disconnect switch and
ignition switch to ON position
(TM 5-3805-298-10).
4. Start and idle engine until normal
operating temperature
(transmission fluid 129F) is
reached (TM 5-3805-298-10).
5. Using MSD (WP 0008), verify
Event Code E0236 Is Active - Proceed
event code E0236 is not active.
to Test Step 4.
Event Code E0236 Not Active -
Replace transmission oil filter base
(WP 0316).
Proceed to Test Step 6.
0020-4