TM 5-3805-298-23-1
0027
Table 1. E0600 High Hydraulic Oil Temperature Event Code.
0027
EID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
E0600 High Hydraulic Oil
Conditions Which Generate This
Temperature Event Code
Code:
The engine electronic control module
(ECM) detects hydraulic oil
temperature is too high.
System Response:
Hydraulic oil temperature gauge will
indicate in the red on instrument
cluster; event code will be logged.
Possible Performance Effect:
Reduced work load.
Test Step 1. Verify Symptom and
Check for Active Diagnostic Codes.
1. Connect MSD (WP 0008) and
select C6.6 924.
2. Start and operate machine in
Event Code E0361 Not Active -
Proceed to step 3.
various speeds and loads
(TM 5-3805-298-10).
Event Code E0361 Active - Diagnose
event code E0361 first (WP 0005).
3. Using MSD (WP 0008), check for
Diagnostic Codes Are Not Active-
active diagnostic codes.
Proceed to Test Step 2.
Diagnostic Codes Are Active - Refer
to (WP 0005) and repair active
diagnostic codes first.
Test Step 2. Reduce Load on
Machine Hydraulics.
1. Modify machine operation to
reduce hydraulic system load.
2. Monitor hydraulic oil temperature
Hydraulic Oil Temperature Gauge
gauge (TM 5-3805-298-10).
Decreases to Green Area - Maintain
reduced load on hydraulics.
Proceed to Test Step 10.
Hydraulic Oil Temperature Gauge
Remains in Red Area During Normal
Operation - Proceed to Test Step 3.