TM 5-3805-298-23-1
0027
Table 1. E0600 High Hydraulic Oil Temperature Event Code - Continued.
027
EID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 9. Test Relief Valve.
E0600 High Hydraulic Oil
Perform Pilot System Pressure Test
Pressure Reading Is 377 25 psi
Temperature Event Code -
(2600 170 kPa) - Replace hydraulic
and Adjustment (WP 0166).
Continued
fluid (WP 0368) and filter (WP 0385).
Proceed to Test Step 10.
Pressure Reading Is Above or
Below 377 25 psi (2,600 170 kPa)
- Adjust relief valve on pressure
reducing valve to bring pressure
reading into specification (WP 0166).
Proceed to Test Step 10.
Test Step 10. Verify Symptom Is
Resolved.
1. Start and idle engine until normal
operating temperature is reached
(TM 5-3805-298-10).
2. Operate machine in various loads
and speeds.
3. Using MSD (WP 0008), verify
Event Code E0600 Is Active - Repeat
event code E0600 is not active.
troubleshooting from the beginning.
Event Code E0600 Not Active -
Troubleshooting complete.
END OF WORK PACKAGE
0027-15/(16 blank)
