TM 5-3805-298-23-1
0035
Table 1. Engine Cranks But Does Not Run - Continued.
035
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
2. Turn battery disconnect switch to
Engine Cranks But Does Not
the ON position (TM 5-3805-298-
Run - Continued
10).
3. With an assistant, activate the
electric fuel priming pump switch
(TM 5-3805-298-10).
4. Inspect the fuel supply hose
No Leaks Identified - Proceed to
(Figure 8, Item 5) between fuel
step 5.
tank (Figure 8, Item 6) and primary
Fuel Supply Hose Leaks - Tighten or
fuel filter base (Figure 8,
replace hose clamps. If leak remains,
Item 8) for Class I, II, or III leaks,
replace affected fuel supply hose
and loose clamps (Figure 8,
(WP 0210).
Items 4 and 8).
Proceed to Test Step 12.
5. Inspect the fuel supply hose
Fuel Supply Hose OK - Proceed to
(Figure 8, Item 5) between fuel
step 6.
tank (Figure 8, Item 6) and primary
Fuel Supply Hose Is Pinched,
fuel filter base (Figure 8,
Damaged, or Has Sharp Bends -
Item 8) for sharp bends and
Straighten or replace fuel supply hose
pinched or damaged areas.
(WP 0210).
Proceed to Test Step 12.
No Leaks Identified - Proceed to
6. Inspect the fuel supply hose
step 7.
(Figure 8, Item 3) between fuel
filter base (Figure 8, Item 8) and
Fuel Supply Hose Leaks - Tighten or
fuel injection pump (Figure 8,
replace hose clamps. If leak remains,
Item 1) for Class I, II, or III leaks,
replace affected fuel supply hose
and loose clamps (Figure 8, Items
(WP 0210).
2 and 7).
Proceed to Test Step 12.
Fuel Supply Hose OK - Release
7. Inspect the fuel supply hose
electric fuel priming pump switch
(Figure 8, Item 3) between fuel
(Figure 6, Item 1) (TM 5-3805-298-10).
filter base (Figure 8, Item 8) and
fuel injection pump (Figure 8,
Proceed to Test Step 8.
Item 1) for sharp bends and
Fuel Supply Hose Is Pinched,
pinched or damaged areas.
Damaged, or Has Sharp Bends -
Straighten or replace fuel supply hose
(WP 0210).
Proceed to Test Step 12.
0035-18
