TM 5-3805-298-23-1
0035
Table 1. Engine Cranks But Does Not Run - Continued.
035
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
2. With an assistant, activate the
Engine Cranks But Does Not
electric fuel priming pump switch
Run - Continued
(TM 5-3805-298-10).
CAUTION
Primary fuel injection tube must only be used once. Do not tighten fuel
injection tubes that have already been installed and tightened.
Failure to follow this caution may result in damage to equipment.
3. Inspect primary fuel tube
Fuel Injection Tube OK - Proceed to
(Figure 15, Item 1) between fuel
step 4.
injection pump (Figure 15, Item 3)
Fuel Injection Tube Leaks - Replace
and fuel rail (Figure 15, Item 2) for
primary fuel injection tube (WP 0201).
Class I, II, or III leaks.
Proceed to Test Step 12.
4. Inspect fuel tube (Figure 15,
Fuel Injection Tube OK - Proceed to
Item 1) between fuel injection
step 5.
pump (Figure 15, Item 3) and fuel
Fuel Injection Tube Pinched,
rail (Figure 15, Item 2) for sharp
Damaged, or Has Sharp Bends -
bends and pinched or damaged
Replace primary fuel injection tube
areas.
(WP 0201).
Proceed to Test Step 12.
0035-26
