TM 5-3805-298-23-1
0059
Table 1. 268 Engine Control Module Diagnostic Codes.
0059
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
NOTE
268-2 Engine Control
Module Data Is Erratic,
Perform this test only if condition is active.
Intermittent, or Incorrect
DIAGNOSTIC CODE SET CONDITION
Engine ECM detects one or more of the following configuration
parameters are not programmed:
Flash files.
Injector trim codes.
POSSIBLE CAUSE
Flash file in the ECM has the wrong parameters.
Test Step 1. Check for Active
Diagnostic Codes.
Connect MSD, select C6.6 924
Diagnostic Code 268-2 Active -
(WP 0008), and check for active
Proceed to Test Step 2.
diagnostic codes (WP 0008).
Diagnostic Code 268-2 Not Active -
Troubleshooting is complete.
Test Step 2. Program Engine ECM
with Correct Software.
Program engine ECM (WP 0011).
Program engine ECM with correct
engine software (WP 0011). Clear
logged diagnostic fault code(s)
(WP 0008). Verify correct operation of
machine (TM 5-3805-298-10).
END OF WORK PACKAGE