TM 5-3805-298-23-1
0068
Table 1. 2417 Start Aid Diagnostic Codes - Continued.
068
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 3. Test for Shorted Rear
2417-6 Ether Control
Frame Wiring Harness.
Solenoid Current Above
1. Turn ignition switch and battery
Normal - Continued
disconnect switch to OFF position
(TM 5-3805-298-10).
2. Remove right lower cab access
panels (WP 0347).
3. Disconnect connector EN-C21
(WP 0012, Figure 39) from
connector M-C22 (WP 0012,
Figure 40).
4. Using digital multimeter
Continuity - Replace rear frame wiring
(WP 0174), test for continuity
harness (WP 0295).
between connector M-C22
Proceed to Test Step 4.
(WP 0012, Figure 40) terminal 1
No Continuity - Proceed to step 5.
and terminal 2.
5. Using digital multimeter
Continuity - Replace rear frame wiring
(WP 0174), test for continuity
harness (WP 0295).
between connector M-C22
Proceed to Test Step 4.
(WP 0012, Figure 40) terminal 1
No Continuity - Replace engine wiring
and ground.
harness (WP 0299).
Proceed to Test Step 4.
Test Step 4. Verify Malfunction Is
Resolved.
1. Ensure all wiring harness
connectors are connected.
2. Install right lower cab access
panels (WP 0347).
3. Connect MSD and select C6.6 924
4. Select Diagnostics (Figure 11,
Item 1) and Diagnostic Tests
(Figure 11, Item 2).
5. In the new screen, select Override
Parameters (Figure 11, Item 3).
0068-22
