TM 5-3805-298-23-1
0095
Table 1. 585 Transmission Speed Sensor Diagnostic Codes - Continued.
095
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 7. Test for Open
585-2 Transmission Speed
Transmission Wiring Harness to
Sensor Data Is Erratic,
Transmission Output B Speed
Intermittent, or Incorrect -
Sensor.
Continued
1. Remove right lower cab access
panels (WP 0347).
2. Disconnect connector P-C1
(WP 0012, Figure 53) from
connector C-C15 (WP 0012,
Figure 52).
3. Using digital multimeter
Resistance 5.0 Ohms or Less -
(WP 0174), measure resistance
Replace lower cab wiring harness
between connector P-C1
(WP 0291).
(WP 0012, Figure 53) terminal 7
Proceed to Test Step 12.
and terminal 8.
Resistance Greater Than 5.0 Ohms -
Replace transmission wiring harness
(WP 0298).
Proceed to Test Step 12.
Test Step 8. Test for Shorted Lower
Cab Wiring Harness to Transmission
Output A Speed Sensor.
1. Remove jumper wire from terminal
1 and terminal 2 of connector
P-C17 (WP 0012, Figure 83).
2. Remove right lower cab access
panels (WP 0347).
3. Disconnect connector P-C1
(WP 0012, Figure 53) from
connector C-C15 (WP 0012,
Figure 52).
4. Using digital multimeter
Continuity - Replace lower cab wiring
(WP 0174), test for continuity
harness (WP 0291).
between connector C-C12
Proceed to Test Step 12.
(WP 0012, Figure 26) terminal 2
No Continuity - Proceed to step 5.
and terminal 3.
5. Using digital multimeter
Continuity - Replace lower cab wiring
(WP 0174), test for continuity
harness (WP 0291).
between connector C-C12
Proceed to Test Step 12.
(WP 0012, Figure 26) terminal 2
No Continuity - Proceed to Test Step 9.
and ground.
0095-6