TM 5-3805-298-23-1
0095
Table 1. 585 Transmission Speed Sensor Diagnostic Codes - Continued.
095
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 2. Test for Faulty
585-2 Transmission Speed
Transmission Output A Speed
Sensor Data Is Erratic,
Sensor.
Intermittent, or Incorrect -
Continued
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-298-10).
2. Disconnect connector P-C16
(WP 0012, Figure 72) from
transmission output A speed
sensor.
3. Using digital multimeter
Continuity - Replace transmission
(WP 0174), test for continuity
output A speed sensor (WP 0250).
between transmission output A
Proceed to Test Step 12.
speed sensor connector
No Continuity - Proceed to step 4.
(WP 0012, Figure 106) terminal 1
and case 3.
4. Using digital multimeter
Continuity - Replace transmission
(WP 0174), test for continuity
output A speed sensor (WP 0250).
between transmission output A
Proceed to Test Step 12.
speed sensor connector
No Continuity - Proceed to step 5.
(WP 0012, Figure 106) terminal 2
and case 3.
5. Using digital multimeter
Resistance 1,000 Ohms to 1,200
(WP 0174), measure resistance
Ohms - Proceed to Test Step 3.
between transmission output A
Resistance Less Than 1,000 Ohms or
speed sensor connector
Greater Than 1,200 Ohms - Replace
(WP 0012, Figure 106) terminal 1
transmission output A speed sensor
and terminal 2.
(WP 0250).
Proceed to Test Step 12.
Test Step 3. Test for Faulty
Transmission Output B Speed
Sensor.
1. Disconnect connector P-C17
(WP 0012, Figure 83) from
Transmission Output B Speed
Sensor.
2. Using digital multimeter
Continuity - Replace transmission
(WP 0174), test for continuity
output B speed sensor (WP 0250).
between transmission output B
Proceed to Test Step 12.
speed sensor connector
No Continuity - Proceed to step 3.
(WP 0012, Figure 106) terminal 1
and case 3.
0095-3
