TM 5-3805-298-23-1
0116
Table 1. 1834 Ignition Key Switch (Transmission) Diagnostic Codes - Continued.
0116
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 2. Test Monitoring/Key
1834-2 Ignition Key Switch
Fuse.
Circuit Voltage Erratic,
1. Turn ignition switch and battery
Intermittent, or Incorrect
disconnect switch to OFF position
Continued
(TM 5-3805-298-10).
2. Remove Monitoring/Key fuse from
fuse panel (TM 5-3805-298-10).
3. Using digital multimeter
Resistance 5.0 Ohms or Less - Install
(WP 0174), measure resistance
Monitoring/Key fuse
between fuse terminals.
(TM 5-3805-298-10).
Proceed to Test Step 3.
Resistance Greater Than 5.0 Ohms -
Install new Monitoring/Key fuse
(TM 5-3805-298-10).
Proceed to step 4.
4. Turn battery disconnect switch to
the ON position
(TM 5-3805-298-10) for at least
30 seconds.
5. Turn battery disconnect switch to
the OFF position
(TM 5-3805-298-10).
6. Remove Monitoring/Key fuse from
fuse panel (TM 5-3805-298-10).
7. Using digital multimeter
Resistance 5.0 Ohms or Less - Install
(WP 0174), measure resistance
Monitoring/Key fuse
between fuse terminals.
(TM 5-3805-298-10).
Proceed to step 8.
Resistance Greater Than 5.0 Ohms -
Proceed to Test Step 5.
8. Turn battery disconnect switch and
ignition switch to ON position
(TM 5-3805-298-10) for at least
30 seconds.
9. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-298-10).
10. Remove Monitoring/Key fuse from
fuse panel (TM 5-3805-298-10).
0116-3